|
Introduction
This read me file contains last minute information for Fluke Biomedical's
Ansur ESA601 Plug-In.
History
This chapter describes the changes made between each new released version.
Release 1.1.4
- Bugfix:Before Power
off delay is only applicable for MAP test.
- Included ESA601 Plug-In
User Manual Rev1.
Release 1.1.3
- Patient Lead
configuration in custom setup.
- Included worst case
and All leads option for Patient Leakage tests.
- Included After and
before Power Off delay option in the custom setup of Auto sequence.
- MAP polarity can be
selected in the Custom Setup.
Release 1.1.2
- Recompiled to fix the
module setup problem.
Release 1.1.1
- Recompiled with the
new version of a component compatible to windows Vista.
Release 1.1.0
- Upgraded the test
guide to support the new test guide toolbar introduced with Ansur V2.4.
- The plug-in now
supports COM ports with a port number greater than 16.
Release 1.0.3
- Upgraded to support
changes in firmware version 1.05 related to MAP test.
Release 1.0.2
- Fixed a problem in
communication where patient lead 2 and 3 was interchanged.
Release 1.0.1
- In Test Lead
Calibration, the Calibrate button is now hidden once a calibration has
been successfully completed.
- Added sample templates
for the different standards provided with the plug-in.
- User manual was
improved.
Release 1.0.0
- V1.0.0 is the first
release of the ESA601 plug-in.
Language Changes
This chapter describes the changes made to the language file in each new
version.
The list includes only versions where the language file was changed.
Release 1.1.0
|
