Impulse 6000D/7000DP Plug-In

The Ansur Impulse 6000D/7000DP Plug-In is an add-on module for the Ansur Test Automation software application. The plug-in is used in conjunction with the Impulse 6000D/7000DP Defibrillator Analyzer to provide test automation capabilities using the Ansur PC software.

 

                    

NOTE: Requires Ansur Executive v3.1.1 or newer

Introduction

This ReadMe file outlines changes to each subsequent version of Ansur Impulse 6000D/7000DP Plug-In relative to the previous released version.

 

USB Driver and Cable Requirements

USB installation for Impulse 6000D/7000DP is installed automatically with Ansur executive 2.5.0 and higher.

 

Use a standard USB printer cable to connect the Impulse 7000 to your PC.

History

This chapter describes the changes made between each new released version.

Release 1.2.5

·        Fix for the template settings not retained when loading file from older plug-in

Release 1.2.4

·        Fix for the VFIB2 waveform in the Supraventricular type

·        Translate legacy 'VFib' <ECGType> value to 'VFib1

Release 1.2.3

  • Index values changed for the VFIB2 Coarse and VFIB2 Fine for the Arrhythmia Ventricular selection.. Retained the value of the Asystole to support older Ansur files.

Release 1.2.2

  • Added support for VFIB2 commands for Energy Measurement, Charge Time, Sync Time tests

Release 1.2.1

  • Support for the new Ansur Executive 3.1.1.

Release 1.1.5

  • Bug fix: Display of MTI data of all instruments in the print report.
  • Bug fix: To open the MTT & MTR file in French language, modified the XML tags while saving MTT & MTR file.

Release 1.1.4

  • Defib Pulse Repition test changed for Norwegian language setting.

Release 1.1.3

  • Implemented the External Load Selection.

Release 1.1.2

  • Dynamic graph scaling is implemented in the waveform.

Release 1.1.1

  • The graph scaling is modified for the FW version greater than v1.02

Release 1.1.0

  • Implemented the display of Serial Number, Firmware version and Equipment of the instrument in print report.
  • Implemented Norwegian language settings for communication error of waveform tests and opening/saving templates.

Release 1.0.0

  • V1.0.0 is the first release of the Impulse 6000D/7000DP plug-in.

 

Language Changes

This chapter describes the changes made to the language file in each new version.
The list includes only versions where the language file was changed.

Release 1.0.0

  • Initial revision.

 

Fluke Biomedical

6045 Cochran Road

Cleveland, OH 44139-3303 U.S.A.       

 

Fluke Biomedical Europe

Science Park Eindhoven 5110

5692EC Son, The Netherlands

 

For more information, contact us:
U.S.A. (800) 850-4608 or

Fax (440) 349-2307

Europe/M-East/Africa +31 40 267 5435 or

Fax +31 40 267 5436

Other countries +1 (440) 248-9300 or

Fax +1 (440) 349-2307

Email: [email protected]   

Web access: www.flukebiomedical.com

 

© 2014 Fluke Corporation. All rights reserved.