| Fluke Biomedical

ESA612 Electrical Safety Analyzer

One-touch Testing with ECG

tabs

Overview

The ESA612 Electrical Safety Analyzer represents the next generation in testers for biomedical professionals that perform field service on medical equipment throughout their facilities, in clinics, and anywhere onsite service is required. Portable, lightweight, and designed for operation in tight spaces, the ESA612 offers the functionality of a simulator and electrical-safety analyzer in a single test tool. With the selection of two test loads, this versatile product can be used worldwide to test to preventative maintenance electrical safety standards of choice: ANSI/AAMI ES1:1993 (NFPA-99), IEC62353 (VDE 751), and AN/NZS 3551. The versatility of the multifaceted ESA612 is further expanded with optional automation software, which speeds and simplifies testing and provides high-end-analyzer productivity at software-level investment. Ansur-automated ESA612 standardizes test procedures, compares results to standards limits, and generates and stores reports for total digital data management.

Key Features

Portable, ergonomic, lightweight and easy to use
Large, easy-to-read display with adjustable contrast
Human-factors-designed user interface
Tilt stand design for stand-up testing in field environments
Five applied parts jacks and easy ECG snap connection with optional expander box
ECG waveform tests and dual-lead measurements combine the functionality of a simulator and electrical-safety analyzer in a single test tool
Replaceable mains fuses keep the device in the field and out of the repair shop
Internal memory for 100 test records
20 A at 120 V current capability
USB connection for use with Ansur and Data Viewer software (for memory download to PC)
Two-year extended warranty (no-cost, available after first-year calibration at the Fluke Biomedical Cleveland Service Center)
Optional Ansur automation software standardizes test procedures, compares results to standards limits, generates/stores reports and provides total digital data management
Rigorously tested for rugged field applications, with CE and CSA in addition to the Fluke-quality-design stamp of approval

General Specifications

Voltage

Range (mains voltage)

90 V ac rms to 132 V ac rms
180 V ac rms to 264 V ac rms

Range (accessible voltage)

0 V ac rms to 300 V ac rms

Accuracy

± (2 % of reading + 0.2 V)

Voltage tests

Mains and point to point

Earth Resistance

Modes

Two terminal

Test current

> 200 mA ac

Ranges

0 Ω to 2 Ω

Accuracy

± (2 % of reading + 0.015 Ω)

Resistance tests

Earth resistance and point to point

Equipment Current

Mode

AC rms

Range 0 A to 20 A

Accuracy ± (5 % of reading + (2 counts or 0.2 A, whichever is greater))

Duty cycle

15 A to 20 A, 5 min. on/5 min. off
10 A to 15 A, 7 min. on/3 min. off
0 A to 10 A continuous

Leakage Current

Modes

ac + dc (true rms)
ac only
dc only

* Modes are available in all leakage tests with the exception of MAP leakages that are available only in true rms.

Patient load selection (input impedance)

AAMI ES1-1993 Fig.1 IEC 60601-1: Fig 15

Crest factor

= 3

Ranges

0 µA to 199.9 µA
200 µA to 1999 µA
2 mA to 10 mA

Frequency response/ Accuracy

DC to 1 kHz: ± (1 % of reading + (1 µA or 1 LSB, whichever is greater))
1 kHz to 100 kHz: ± (2 % of reading + (1 µA or 1 LSB, whichever is greater))
1 kHz to 5 kHz (current > 1.6 mA): ± (4 % of reading + (1 µA or 1 LSD, whichever is greater))
100 kHz to 1 MHz: ± (5% of reading + (1 µA or 1 LSB, whichever is greater))
Note: Accuracy for Isolation, MAP, Direct AP, Alternative AP, and Alternative Equipment leakage tests all ranges are + (2.5 µA or 1 LSD, whichever is greater)

Leakage tests

Ground wire (earth)
Chassis (enclosure)
Lead to ground (patient)
Lead to lead (patient auxiliary)
Lead isolation (mains on applied part)
Direct equipment
Direct applied part
Alternative equipment
Alternative applied part
Point to point

Mains on applied part

100 % of mains

Differential Leakage

Ranges

75 µ A to 199 µA
200 µA to 1999 µA
2 mA to 20 mA

Accuracy

± (10 % of reading + (2 counts or 20 uA, whichever is greater))

Insulation Resistance

Ranges

0.5 MΩ to 20 MΩ
20 MΩ to 100 MΩ

Accuracy

± (2 % of reading + 0.2 MΩ)
± (7.5 % of reading + 0.2 MΩ)

Source test voltage

250 V dc, 500 V dc

Insulation resistance tests

Mains-PE, AP-PE, Mains- PE, Mains-NE (non-earthed accessible conductive part) and AP- NE (non-earthed accessible conductive part)

ECG Performance Waveforms

Accuracy

± 2 %
± 5 % for amplitude of 2 Hz Square wave only, fixed @ 1 mV Lead II configuration

Waveforms: Rates

ECG complex (BPM)	30, 60, 120, 180, and 240
Ventricular fibrillation
Square wave (50 % duty cycle) (Hz)	0.125 and 2
Sine wave (Hz)	10, 40, 50, 60, and 100
Triangle wave (Hz)	2
Pulse (63 ms pulse width)	30 BPM and 60 BPM

Power ratings

120 V ac or 230 V ac

Mains Voltage Inlet Power Range

90 V ac rms to 132 V ac rms
180 V ac rms to 264 V ac rms

Maximum Current

20 A
16 A

50 or 60
50 or 60

Physical Case

Dimensions (WxDxH)

17.63 cm x 8.38 cm x 28.45 cm (6.94 in x 3.3 in x 11.2 in)

Weight

1.6 kg (3.5 lb)

Environmental specifications

Operating temperature

10 ºC to 40 ºC (50 ºF to 104 ºF)

Storage temperature

-20 ºC to 60 ºC (-4 ºF to 140 ºF)

Operating humidity

10 % to 90 % non-condensing

Altitude

120 V ac mains supply voltage up to 5, 000 meters
230 V ac mains supply voltage up to 2,000 meters

Warranty

Two-year extended warranty (no-cost, available after first-year calibration at the Fluke Biomedical Cleveland Service Center, otherwise standard one year warranty applies)

Ordering Information

Standard Accessories

3111008 USA/AUS/ISR Test Lead Accessory Kit

3111008 USA/AUS/ISR Accessory Kit

Retractable Test Leads

Retractable Test Leads (part# 2070133 - TL221-4201, 175-266-011 TEST LEADS, S2S)

75057 Powercord set NEMA 6-15/C19 250V

75057 Powercord set NEMA 6-15/C19 250V (part# 2238671)

Power cable w/C19 plug, 120V/15 A

75033 Power cable w/C19 plug, detachable, 120 V/15 A – USA (part# 2238644)

3111024 EUR ESA Test Lead Accessory Kit

EUR Accessory Kit: test lead set, TP74 test probe set, AC285 alligator clip set (ESA T/L kit, EUR)

ECG Adapter Box Assembly

1210 ECG 1-to-10 Adapter Box Assembly (part# 3392119)

ESA612-2016 Banana Jack to ECG Adapter

5-to-5 Banana Jack to ECG Adapter (BJ2ECG) (part# 3359538)

NPA - null post assembly

NPA - null post assembly (part# 3326842)

Ground Pin Adapter

Ultrasound Test Cable Adapter

Ultrasound Test Cable Adapter, optional (part# 3472633)

Universal Banana Adapter

Universal Banana Adapter (10-pack)(part# 2462072)

50 Ft Test lead

50 Ft Test lead (part# 4316223)

75 Ft Test Lead

75 Ft Test Lead (Part# 4794643)

ESA612 Electrical Safety Analyzer

tabs

3111008 USA/AUS/ISR Test Lead Accessory Kit

Retractable Test Leads

75057 Powercord set NEMA 6-15/C19 250V

Power cable w/C19 plug, 120V/15 A

3111024 EUR ESA Test Lead Accessory Kit

ECG Adapter Box Assembly

ESA612-2016 Banana Jack to ECG Adapter

NPA - null post assembly

Ground Pin Adapter

Ultrasound Test Cable Adapter

Universal Banana Adapter

50 Ft Test lead

75 Ft Test Lead

Contact Us

Online Chat

Call

Reach Out